Assigning IP Address in Cisco Router and Juniper (Cisco vs Juniper). This tutorial will help you to understand the difference between assigning IP address in cisco router and juniper router. Both Router has their own IOS so that the configuration also be difference. So we will start by configure Cisco router then juniper router. In cisco router for LAN we are using network 192.168.1.0/24 and for say WAN IP 195.185.110.3/30 and in juniper side for LAN 172.16.10.1/24 and for say WAN IP 103.195.11.3/30 Cisco Router: For IP configuration, first we have to login router configuration mode. Then set all ip addresses in interface and no shutdown command using for up the interface from administratively down because of by default router port is always administratively down. Finally save all changes or configuration by using command copy run start . Router> Router>enable Router# Router#configure terminal Router(config)#...
A blog about basic Cloud, System and networking concept. Its can help beginner to learn basic cloud computing, system administration and networking and give some idea about techie change.